Anti-Scale Filter Installation
Submitted by spreisz on Tue, 12/26/2006 - 20:04.
With new quick connect ends, it's easier than ever!
 |
1) After unpacking your anti-scale filter find the flow arrow orientation and make sure the water will flow thought as the arrow shows. |
 |
2) Mark the 1/4" tubing supplied with your Desert Spring humidifier, leaving enough extra tubing to push into the anti-scale filter quick connect end adaptors. |
 |
3) Cut the tubing with a sharp knife making sure not to leave any plastic burs and to not flatten the tubing. |
 |
4) Push the 1/4" tubing into the inline anti-scale filter quick connect ends. Make sure to push the tubing in far enough to reach the gaskets found inside the quick connect ends. |
 |
5) Turn the water on and allow the desert spring humidifier basin to fill until water stops. Now check for leaks and press tubing further into quick connects if required. |
 |
6) Next, secure your inline anti-scale filter to the surrounding system utilizing the attachment devices of your choice. |
 |
7) Clean up and your finished. |